Finally, I’m back to tell you that the journey we started in this post was completed *just* in time for Lexington Comic and Toy Con a few weekends ago. Meredith and I were working on it until all hours the week leading up to the Con, and we succeeded!
When we last left off, the pattern was made (by both draping and drafting), and the mockup fitted, but there was, as yet, no gown! We quickly remedied that. To save time, I put together the bodice and bodice lining, Hannah W. put together the skirt and skirt lining, then we put them together on a big Saturday sewing day.
Despite the weight, we did get it all put together that afternoon:
In addition to putting the dress together, we also got the hem and the armhole edges pinned in place and ready for stitching that day.
I did the stitching in the evening:
Meredith and I had hoped to get a lot of the embellishment done the next Saturday, but we were hampered by having miscalculated how much cord/vines we would need. The vines are made of silver vinyl cord, which we dry-brushed with black acrylic paint to give them a bit of tarnish.
Meredith also got a pile of roses made and put onto the train. We dyed a few handfuls of the roses in diluted black ink to get the color variation.
On our next big work day, we started to give the fabric a bit of it’s fuzzy texture with wire brushes. We were able to make it a bit fuzzier, but had to move on to other, more noticeable things if it was going to be wearable in time!
Meredith went back to train embellishment, and I put on the rest of the cord before moving on to the clumps of roses and leaves on the front waist.
I started with the roses, which are different from the ones on the train because they need to lay flat and be seen from the front, rather than from the side. The roses on the train are made by coiling up strips of fabric to form a spiral. To make the ones for the front, I had to fold the strip as I went to create a more complex rose shape.
I used some velvety millinery leaves, cut down to the right size and shape to make the rest of the piece.
We called it quits for the night at this point, and started again the next day. My first task that day was to make the large flower that hangs where all the dangling vines in front converge. It is made of a combination of felt, beads, and scraps of the millinery leaves that had been cut apart.
With it in place, I could embellish the rest of the hanging vines around it. Their decoration includes large thorns, felt leaves and small silver, gold, and green glass beads.
After all the practice, I made short work of adding small thorns, large thorns, beads, and more leaves to the back of the dress.
Painting the embellishment was the final big step. We did this for two reasons: some things, like the large thorns and the millinery leaves, needed to get toned to match the color palette of the rest of the dress. Others, like the felt leaves, we painted to have more detail and depth.
We did get it done just in time! I actually didn’t even have a chance to take the final photos until after Lexington Comic and Toy Con, so I apologize if there are a few wrinkles!
All told, I think we did four really big days on the embellishment, watched six Harry Potter movies, Tangled, Hogfather, How to Train Your Dragon, Waitress, and The Princess Bride. The dress, true to the spirit of Game of Thrones, has both blood and red wine stains hiding under all the flowers.
I’ll be back next week with new historical pretties!